(7)
Press the [START] button.
Updating starts and the processing status is displayed on the LCD screen.
When the FROM basic section software version to be updated is "V1.00 / 1.12" or earlier:
OS Update .......
UI Data Update .......
SysFirm Update .......
Engine MAIN Update .. Flash Update
When the FROM basic section software version to be updated is "V1.00 / 4.22" or later:
Status display during update
OS UI Update .......
Scanner Firm Update .......Flash Update
© 2004 - 2007 TOSHIBA TEC CORPORATION All rights reserved
Fig. 6-42
Status display when update is completed
Scanner Firm Update..Completed
Fig. 6-43
Status display when update is completed
OS UI Update
Engine MAIN Update .......Completed
e-STUDIO200L/202L/203L/230/232/233/280/282/283
6 - 37
06/10
.......Completed
FIRMWARE UPDATING
6