Toshiba e-STUDIO230L Service Handbook page 388

(3) Close the RADF and check if the positioning
pins fit the holes on the RADF.
[B] Adjustment
If the pins cannot be fitted into the holes, perform the adjustment according to the following procedure.
(1) Remove the right-hand hinge screw at the
rear side.
(2) Loosen the left-hand hinge screw at the rear
side.
e-STUDIO200L/202L/203L/230/232/233/280/282/283
ADJUSTMENT
© 2004 - 2007 TOSHIBA TEC CORPORATION All rights reserved
3 - 70
05/11
Fig. 3-81
Fig. 3-82
Fig. 3-83