Items Shown On The Display Panel; Display During Normal Copying - Toshiba e-STUDIO 160 Service Manual

5.2 Items Shown on the Display Panel

5.2.1 Display during normal copying

No. Message
1 Wait warming up
2 READY
3 COPYING
4 Saving energy
Select original size
5
6 -----
e-STUDIO160/200/250 DISPLAY UNIT
Condition of machine
Being warmed up
• Displayed after the main switch
is turned ON up until the machine
becomes ready for copying.
Fig. 5-2-1.
Standby for copying
• The machine is ready for copying
and operator's instructions on
copying conditions can be input.
• Returns to the default condition if
no key is pressed for the setting
time of auto clear timer.
Now copying.
• Displayed by pressing the
START key.
• Copy quantity indicator becomes
"ex. 3 → 2 → 1 → 3" and copying
is completed.
Energy saver conditions.
Platen sort copying standby state.
Timer off
• No message is displayed in the
display panel.
5 - 2
Notes
• When the main switch comes
ON, the quantity and reproduc-
tion ratio of copies are indicated,
or example, as "1", "100%".
• Copy quantity indicator shows "1".
When a digital key is pressed,
that number indicates the set
quantity.
• The set quantity can be cleared
to "1" by pressing the CLEAR/
STOP key.
• Bypass copying is possible.
• After completion of copying, the
copy quantity indicator returns to
the initially set number.
• Reset by pressing the any key
except the SUPER ENERGY
SAVER key.
• When using original cover.
• Press the any key to clear.
December 2002 TOSHIBA TEC