Setting Range Correction - Toshiba e-STUDIO230L Service Handbook

3.5.3

Setting range correction

The values of the background peak / text peak in the range correction can be switched to "varied" or
"fixed" in the following codes.
If they are fixed, the range correction is performed with standard values.
The values of the background peak affect the reproduction of the background density and the values of
the text peak affect that of the text density.
Original mode
Text/Photo Photo
825 827
830 832
<Procedure>
Procedure is same as that of
© 2004 - 2007 TOSHIBA TEC CORPORATION All rights reserved
Item to be adjusted
Text
826 Range correction for original
manually set on the original
glass
831 Range correction for original
set on the RADF
P.3-29 "3.5.1 Density adjustment".
3 - 31
< Adjustment Mode (05) >
Remarks
The following are the default values
set for each original mode.
Text/Photo: 12, Photo: 12, Text: 12
Each digit stands for:
One's place: Automatic density mode
Ten's place: Manual density mode
The setting conditions possible are
as follows:
Background peak Text peak
1: fixed fixed
2: varied fixed
3: fixed varied
4: varied varied
e-STUDIO200L/202L/203L/230/232/233/280/282/283
3
ADJUSTMENT