Toshiba e-STUDIO230L Service Handbook page 412

Setting
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
Note: Note:
Perform the shipping position operation when the finisher is packed again.
e-STUDIO200L/202L/203L/230/232/233/280/282/283
ADJUSTMENT
Item
Lower stack tray The lower stack tray moves down
motor (down) and stops when the lower stack tray
lower limit sensor is turned ON.
Stapler motor The stapler motor stops after the sta-
pling operation.
Shipping position The upper and lower stack trays
operation move to the shipping position and
stop.
Operation
© 2004 - 2007 TOSHIBA TEC CORPORATION All rights reserved
3 - 94
To stop
• Press SW2 again.
• Turn OFF the joint
sensor (S4).
• Press the stapler
safety switch (S14).
• Turn OFF the joint
sensor (S4).
• Turn OFF the joint
sensor (S4).