Adjustment Of Skew - Toshiba e-STUDIO230L Service Handbook

3.10.3

Adjustment of skew

When an image skew occurs, adjust it according to the following steps, Step 1
Note: Note:
Perform this adjustment after confirming that the equipment has been adjusted properly.
Prior to this adjustment, of RADF position and height are needed to be adjusted.
(1) Step 1
Case A:
Adjust the aligning adjustment position to the rear side "-" of the original (
Adjustment of aligning").
Case B:
Adjust the aligning adjustment position to the rear side "+" of the original (
Adjustment of aligning").
A
© 2004 - 2007 TOSHIBA TEC CORPORATION All rights reserved
Paper
Original
Fig. 3-65
3 - 59
B
White arrow: feeding direction
e-STUDIO200L/202L/203L/230/232/233/280/282/283
Step 2 Step 3.
P.3-62 "3.10.5
P.3-62 "3.10.5
ADJUSTMENT
3