Access to Envelope Feeder Area
Unlatch the envelope area feed
rollers to access a jam in the
envelope feeder area.
1. Pull the release lever in the
direction of the arrow.
2. Lift the envelope area feed
rollers for access to the jam.
To relatch the feed rollers:
1. Release the envelope area feed rollers and let them rest in position
2. Push the rollers firmly down until they latch into position.
NOTE: You can get better access to this area by removing fold plate 1 and
sheet feeder 2.
Access the Envelope Exit Area
1. Pull down the access door
(shown here) to gain access
to the jammed material.
2. When you close the access
door, make sure to latch it
firmly in position.
SV63138 Rev. A
Clear Material • 6
6-5