Material Specifications • 8; Sheet Feeders - Pitney Bowes Relay 3000 User Manual

Material Specifications
IMPORTANT: All specifications are subject to change without notification
and are subject to test.

Sheet Feeders

Minimum Sheet Size: 5 inches (127mm) width
Maximum Sheet Size: 9 inches (229mm) width
Paper Weights:
Fold Configurations (material length limits before folding):
Fold Type
Single fold
C (letter fold)
Z (accordion fold) 8 inches (201mm) - 14 inches (356mm)
Double fold
Double Document Detector Material Range:
Minimum: 16 lb (60gsm)
Maximum: 32 lb (120gsm)
Feed Tray Capacity: maximum of 325 sheets of 20 lb. bond (80gsm)
Manual Feed Mode:
• Inserter processes stapled sets of up to five sheets of 20 lb. bond
(80gsm) up to a maximum total weight of 100 lbs. (400gsm) per set.
NOTE: For manual feed applications, you may use only sheet feeder
number 1, plus the insert feeder if required.
• Maximum compressed thickness after folding must not exceed
0.078 inch (2mm).
• We do not recommend the use of glossy/coated sheets.
SV63138 Rev. A
Material Specifications • 8
5 inches (127mm) length
16 inches (406mm) length
16 lb. (60gsm) (minimum, non-OMR)
18 lb. (70gsm) (minimum, OMR)
32 lb. (120gsm) (maximum)
Measurement
5 inches (127mm) - 12 inches (315mm)
6 inches (150mm) - 14 inches (356mm)
12 inches (305mm) - 16 inches (406mm)
8-3