Oil Pump Installation - Suzuki RM-Z250 Owner's Service Manual

11-6 LUBRICATION SYSTEM

OIL PUMP INSTALLATION

Install the oil pump in the reverse order of removal. Pay attention
to the following points:
• Install the oil pump cover 2 and pin 3 to the oil pump driven
gear shaft 1.
• Fit the slot A of the oil pump No.1 inner rotor 4 to the pin 3 .
Face the punch mark B on inner rotor 4 to the oil
pump cover.
• Install the oil pump No.1 outer rotor 5.
Face the punch mark C on outer rotor 5 to the oil
pump cover.
• Apply engine oil to the oil pump drive gear shaft, outer rotor
and inner rotor.
• Install the oil pump plate 6 and pin 7.
• Fit the slot D of the oil pump No.2 inner rotor to the pin 7.
CAUTION
CAUTION