10-10
TRANSMISSION AND CRANKSHAFT
BEARING REMOVAL AND INSTALLATION
• Remove the oil seals. (!10-9)
• Remove the bearing retainers.
REMOVAL
The removed bearing should be discard.
• Remove the bearings (1, 3, 5, 6, 7) with the special tool.
" 09913-70210: Bearing installer set
Bearing 1, 7: $ 35 Attachment
Bearing 3, 5, 6: $ 40 Attachment
• Remove the bearings (2, 8) with the special tool.
" 09921-20240: Bearing remover set
Bearing 2, 8: Remover 17 mm
CAUTION