GEARSHIFT LINKAGE
REMOVAL
• Drain engine oil. (!2-12)
• Drain engine coolant. (!13-3)
• Remove the gearshift lever 1.
NOTE:
Mark the gearshift shaft head at which the gearshift lever slit set
for correct reinstallation.
• Remove the right crankcase cover and clutch assembly.
(!7-7, 8-3)
• Remove the magneto cover. (!14-12)
• Remove the primary driven gear and oil pump idle gear.
(!11-4)
• Remove the gearshift shaft 2 and washer 3.
• Remove the washer 3, snap ring 4 and return spring 5 from
the gearshift shaft 2.
" 09900-06107: Snap ring pliers
• Remove the gearshift pawl lifter 6.
• Remove the gearshift cam driven gear 7.
NOTE:
Be careful not to drop the pins and springs when removing the
gearshift cam driven gear.
GEARSHIFTING
9-3