Suzuki RM-Z250 Owner's Service Manual page 196

• Fit the float chamber.
• Tighten the screws with the hose plates 6 and cable holder
7.
• Apply THREAD LOCK to the plate mounting screws and
tighten them.
& 99000-32050: THREAD LOCK "1342"
Replace the O-ring and gasket with new ones to pre-
vent fuel leakage.
• Fit the spring 8.
• Install the diaphragm 9 so that the marks C face outside.
Replace the O-rings with new ones.
• Apply thin coat of the grease to the O-ring.
Replace the O-ring with a new one.
' 99000-25010: SUZUKI SUPER GREASE "A"
• Install the pilot screw 0.
NOTE:
Turn in the pilot screw 0 until it lightly seats, then back it out the
counted number of turns.
% Pilot screw: 1 and 1/2 turns back (Reference data)
CAUTION
CAUTION
CAUTION
(or equivalent grease)
FUEL SYSTEM 12-13
45˚