10-16
TRANSMISSION AND CRANKSHAFT
CRANKCASE INSTALLATION
• Fit the dowel pins and gasket 1.
Replace the gasket 1 with a new one.
• Fit the right crankcase on the left crankcase.
• Install the bracket A to the bolt. (!19-24)
• Tighten the crankcase bolts to the specified torque.
' Crankcase bolt: 11 N·m (1.1 kgf-m, 8.0 lb-ft)
NOTE:
If it is hard to tighten the bolts, separate the crankcase and con-
firm that the transmission parts are assembled correctly.
• Install the oil strainer (Feed pump side) and oil strainer cap
2. (!2-14)
• Inspect the crankshaft, countershaft and driveshaft for smooth
movement.
• Apply grease to oil seal lip and O-rings 3.
% 99000-25010: SUZUKI SUPER GREASE "A"
Replace the O-rings 3 with new ones.
• Fit the O-rings 3 and spacer 4 to the driveshaft.
CAUTION
(or equivalent grease)
CAUTION