Break-In (Running-In); When The Motorcycle Is New; When Engine Parts Are Replaced - Suzuki RM-Z250 Owner's Service Manual

Hide thumbs Also See for RM-Z250:

Table of Contents

GENERAL INFORMATION

BREAK-IN (RUNNING-IN)

1) Warm up the engine before starting off.

2) Ride for 60 minutes using less than 1/2 throttle opening.

3) Ride for 60 minutes using less than 3/4 throttle opening.

* The break-in (running-in) period is the period of greatest wear.

* The bolts and nuts of the new machine can loosen quickly. Be

sure to retighten the bolts and nuts during the break-in (run-

ning-in) period.

Follow the same procedure when any of the following parts are

Crankshaft bearing

Table of Contents