Adding And Registering Handset - AT&T E5901, E5902B, E5903B, E5911, E5912B, E5913B, E5914B, E5921, E5922B, E5923B, E5924B, E6001, E6002B, E6012B, E6013B, E6014B, E381 User Manual

Getting started
Adding and registering handsets
Before using a new E598-1 handset, you must register it with the
E5901/E5902B/E5903B/E5911/E5912B/E5913B/E5914B/E5921/
E5922B/E5923B/E5924B/E6001/E6002B/E6012B/E6013B/
E6014B/E3813B telephone base (purchased separately). The E5901/
E5902B/E5903B/E5911/E5912B/E5913B/E5914B/E5921/E5922B/
E5923B/E5924B/E6012B/E6013B/E6014B/E3813B telephone can
accommodate up to four cordless handsets.
• The handset provided with the E5901/E5911/E5921/E6001 is
automatically registered as handset 1. Additional handsets will be
assigned numbers in the order they are registered (handset 2, hand-
set 3, or handset 4). You can register a maximum of four handsets.
• The E5902B/E5912B/E5922B/E6002B/E6012B has two handsets
automatically registered as handset 1 and 2. You can register two
additional handsets, which will be assigned number 3 and 4.
• The E5903B/E5913B/E5923B/E6013B/E3813B has three hand-
sets automatically registered as handset 1, 2 and 3. You can register
one additional handset, which will be assigned number 4.
• The E5904B/E5914/E5924B/E6014B has four pre-registered
handsets, so you cannot register any additional handset to it.
NOT REGISTERED
PRESS HNDST LOC
4 SEC ON BASE
Before using a new E598-1 handset,
you must register it with the telephone
base. Each handset must be registered
seperately.
To register a handset to your telephone
base
• When first purchased, all optional
accessory handsets show NOT
REGISTERED on the screen. The new
handset may need to be charged for
five minutes before registering to the
telephone base.
• Make sure your handset battery is
properly installed and charged (page
3).
4
/E3813B telephone can telephone can