Screen Display Messages - AT&T E5901, E5902B, E5903B, E5911, E5912B, E5913B, E5914B, E5921, E5922B, E5923B, E5924B, E6001, E6002B, E6012B, E6013B, E6014B, E381 User Manual

Appendix
Handset display screen messages
TONE
MUTE
REDIAL
DELETE
PAUSE

Screen display messages

CHARGING
UNABLE TO CALL
TRY AGAIN
NOT AVAILABLE
AT THIS TIME
MICROPHONE ON
INTERCOM TO:
INTERCOM ENDED
CALLING
HANDSET X
TRANSFER TO:
NO SIGNAL,
CALL ENDED
WARNING
CHECK BATTERY!
A handset with a low battery has
been placed in the telephone base
or charger.
Failed intercom or conference call
(there are already two handsets
being used).
Someone else is already using the
directory or call log when you try
to do so.
The call switches from being on
mute to normal call.
The handset is to initiate an inter-
com call to another handset. (You
have to press the handset number
of the destination handset.)
The intercom call has just been
ended by you or the receiver of the
call.
The handset is calling another
handset (for intercom calls).
The handset is to transfer a put-
on-hold external call to another
handset.
The handset is out of range while
on a call.
The battery is not installed or not
installed properly in the handset.
-OR-
The battery needs to be replaced.
-OR-
An incorrect battery has been
installed by mistake. Use only the
supplied rechargeable battery or
replacement battery (model 27910,
part number 89-0099-00-00)
42