Installation and setup Choose a central location close to a telephone jack and a power outlet not connected to a wall switch. The telephone base can be placed on a flat sur- face or mounted on a standard wall plate. For optimum range and better reception, place the telephone base in a high and open location.
Page 3
Installation and setup After battery installation, the battery may have enough charge to allow some calls. For best performance, place the handsets in the telephone base or the charger and allow to charge for 16 hours before use. You can keep the battery charged by returning the handsets to the telephone base or the charger after use.
Quick reference guide Handset Press to display caller ID information. PHONE/FLASH Press to make or answer a call. During a call, press to receive an incoming call if call waiting is activated. MUTE/DELETE While on a call, press to mute microphone. While reviewing the call log, press to delete an individu- al entry, or press and hold...
Quick reference guide Telephone base CHARGE/IN USE • Flashes when another telephone on the same line and on steady when one of the handsets is in use. • On steady when the answering system is answering an incoming call. • Flashes while an incoming call is ringing.