Handset Locator - AT&T E5901, E5902B, E5903B, E5911, E5912B, E5913B, E5914B, E5921, E5922B, E5923B, E5924B, E6001, E6002B, E6012B, E6013B, E6014B, E381 User Manual

REDIAL
555-1234
TONE
MUTE
REDIAL
DELETE PAUSE
Telephone operation
Handset operation
Last number redial
Press REDIAL
most recently called numbers (up to
32 digits). Press
repeatedly to view up to five recently
called numbers. The handset will beep
twice at the beginning or end of the
OFF
list. Press
PHONE
Press
to redial any displayed number or press
PHONE
/FLASH
REDIAL
/PAUSE
called number (up to 32 digits).
Press
MUTE/
displayed number from the redial memory.

Handset locator

If you misplace the handset(s), press
HANDSET LOCATOR at the telephone
base. This starts the paging tone at the
handset(s) for 60 seconds to help you
locate the handset(s). To stop the paging
tone, press
or any dial pad key (0-9, *, or #) on the
handset(s), or press
on the telephone base.
NOTES:
1. The handset ringer volume also determines the
level of the paging tone. If the handset ringer
volume level is set to off (0), that handset will be
silenced for all calls and paging (see page 20).
2. During a page, if you press
MUTE/
DELETE
handset will be silenced. But the page will not
be cancelled.
9
to display the
/PAUSE
or REDIAL
,
to exit.
/CLEAR
or
/FLASH
SPEAKER then
or
to call the most recently
DELETE to delete the
PHONE
/FLASH,
HANDSET LOCATOR
on a handset, the ringer of that
/PAUSE
SPEAKER
SPEAKER
,
OFF/ or
CLEAR