Registration And Deregistration; Adding And Registering Handsets; Register A Handset To Your Telephone Base - AT&T TL88002BK User Manual

Registration and deregistration

Adding and registering handsets

Before using a new TL88002/TL88002BK handset, you must
register it with the AT&T TL88102/TL88102BK/TL88202
telephone system (purchased separately). The telephone system
accommodates up to 12 handsets.
TL88002 (silver) is for use with TL88102 telephone system.
TL88002BK (black) is for use with TL88102BK telephone system.
The handset provided with your telephone system is already
registered as HANDSET. Additional handsets registered to the
telephone system are assigned in sequential order they are
registered (up to HANDSET 12).
You must register each handset separately. When first purchased,
each expansion handset shows Press [HOLD] on base for 4 sec,
then press [#] on handset.
Register a handset to your TL88102/TL88102BK/TL88202
telephone base
1. Before you begin registration, make sure the
handset displays Press [HOLD] on base for 4
sec, then press [#] on handset.
2. Place the unregistered handset in the
telephone base.
3. Press and hold HOLD on the telephone base
for about four seconds until the telephone base
displays Registering handset.... Then, release
the HOLD button. While the handset is still in
the telephone base, press # (pound key) on
the handset. The handset shows Registering...
Please wait and it takes up to 60 seconds to
complete the registration. The handset and the
telephone base show HANDSET X Registered
(X represents the handset number assigned)
and you hear a beep when the registration completes.
NOTES:
If the registration fails, the handset shows Registration failed. To reset the handset,
•
unplug the power from the telephone base and the battery from the handset for a
few seconds, then plug them back in. Try the registration process again.
• You cannot register a handset if any other system handset is in use.
TL88102/TL88102BK/TL88202
L88102/TL88102BK/TL88202
8
Press [HOLD] on
base for 4 sec,
then press [#]
on handset
Registering...
Please wait
HANDSET X
Registered