Installation and setup Choose a central location close to a telephone jack and a power outlet not connected to a wall switch. The telephone base can be placed on a flat sur- face or mounted on a standard wall plate. For optimum range and better reception, place the telephone base in a high and open location.
Page 3
Installation and setup After battery installation, the battery may have enough charge to allow some calls. For best performance, place the handsets in the telephone base or the charger and allow to charge for 16 hours before use. You can keep the battery charged by returning the handsets to the telephone base or the charger after use.
Quick reference guide Handset CENTER Press to display caller ID RIGHT LEFT information. DOWN PHONE/FLASH Press to make or MENU/SELECT answer a call. During Press to display the menu. Once a call, press to receive in a menu, press to select an item an incoming call if call or save an entry or setting.
Quick reference guide Telephone base CHARGE VOICEMAIL On when the cordless handset is properly positioned to charge in Flashes when you have the telephone base. new voice mail (different voice mail system from the IN USE answering system on the On when handset is in use, the telephone base, requires answering system is answering an...