Adding The Handset To Your Telephone Base; Adding And Registering A Handset; About Expansion Handsets; Registering A Handset - AT&T TL30100 User Manual

Adding the handset to your telephone base

Adding and registering a handset

About expansion handsets

Before using a new TL30100 handset, you must register it
with the AT&T TL32100/TL32200/TL32300 telephone system
(purchased separately), the telephone system can accommodate
up to five handsets.
The handset with the TL32100 telephone comes as
HANDSET 1. You can register up to four additional handsets to
the telephone base, and the handset numbers are in numerical
order (HANDSET 2, HANDSET 3, HANDSET 4 and HANDSET 5).
The handsets that come with the TL32200 telephone are
HANDSET 1 and HANDSET 2. You can register up to three
additional handsets to the telephone base, and they are assigned
numbers in sequential order (HANDSET 3, HANDSET 4 and
HANDSET 5).
The handsets that come with the TL32300 telephone are
HANDSET 1, HANDSET 2 and HANDSET 3. You can register
up to two additional handsets to the telephone base, and they
are assigned numbers in sequential order (HANDSET 4 and
HANDSET 5).

Registering a handset

The handset needs to register with the telephone base before
use. You must register each handset separately.
When first purchased, all expansion handsets alternately display
1.Press HS LOC on base 4 sec and 2.Then press # on handset.
The new handset should be charged without interruption for at
least 30 minutes before registering to the telephone base.
9