Model No. NP-PH1201QL
Lens Assembly And Fitting
Assembling the lens
1.
Detach the retaining plates
1
Use a 2.5 mm Allen key to remove the M3 socket head screws
1
Insert the lens into the lens holder. Align the notches on the lens
2.
3
3
4
Installation and Quick-Start Guide
from the lens holder.
2
.
3
LENS ASSEMBLY AND FITTING
1
2
2
2
2
with the notch on the holder
4
.
Notes
Before changing the lens, always
make sure the projector is switched
off and fully disconnected from its
power supply.
When changing the lens, avoid using
excessive force as this may damage
the equipment.
Take care to preserve the original lens
packaging and protective caps for future
use.
The projector will not power on without
the lens fitted.
page 14