Connecting The Power Supply - NEC PH1201QL User Manual

Model No. NP-PH1201QL

Connecting the power supply

When the projector is viewed from the back, the AC mains
inlet is located on the right hand side, toward the rear.
1
Make sure the power switch
2 above the inlet is in the
OFF position, then push the mains connector in firmly.
Installation and Quick-Start Guide
POWER SUPPLY
1 2
Notes
Ensure that the power outlet
includes a ground connection as
this equipment MUST be earthed.
Handle the power cable carefully
and avoid sharp bends. Do not
use a damaged power cable.
page 7