Table of Contents
Advertisement
Model No. NP-PH1201QL
Using The Projector
Title Select menu
Use this menu to select a title to be projected.
The projector contains a list of up to 100 registered titles. Use this menu to select a title from the list.
To select a title:
1.
Open the menu. The
Title Select
2.
Press DOWN to access the list of available titles.
3.
Navigate through the list using the LEFT and RIGHT arrow buttons.
4.
Press ENTER to select a title.
Provided the selected title is connected to a signal, the projection should begin immediately.
Selecting a test pattern
1.
Navigate to the
title on the list.
TEST Pattern
2.
Press DOWN to access the list of test patterns.
3.
Press ENTER to select a test pattern.
The selected test pattern should appear on the screen immediately.
Operating Guide
menu appears by default.
USING THE PROJECTOR
Notes
If the title you want to display is
assigned a preset button, you can
skip the procedure on this page by
simply pressing the preset button.
Up to 16 presets can be assigned
on the projector. Presets 1 to
8 are recalled by pressing the
corresponding preset button. To
recall preset 9 to 16, press and hold
the UP arrow button, then press the
corresponding number button. If,
for example, the preset you wish to
recall is 9, the corresponding keypad
combination is UP + 1. For preset
10, the combination is UP + 2, etc.
page 47
Advertisement
Table of Contents
