Table of Contents
Advertisement
Model No. NP-PH1201QL
3.
Keeping the lens and holder aligned, secure the retaining plates removed earlier.
4. Attach the motor cover using the two M2 socket head screws
1
1
Installation and Quick-Start Guide
LENS ASSEMBLY AND FITTING
provided. Ensure the connector cable
1
2
is not trapped.
2
Notes
Before changing the lens, always
make sure the projector is switched
off and fully disconnected from its
power supply.
When changing the lens, avoid using
excessive force as this may damage
the equipment.
Take care to preserve the original lens
packaging and protective caps for future
use.
The projector will not power on without
the lens fitted.
page 15
Advertisement
Table of Contents
