Table of Contents
Advertisement
Model No. NP-PH1201QL
3.
Loosen the two captive screws
4.
Unplug the remote lock connector
Installation and Quick-Start Guide
on the lens and rotate the lens counterclockwise until it stops.
3
3
3
and pull the lens out of its socket.
4
4
LENS ASSEMBLY AND FITTING
Notes
Before changing the lens, always
make sure the projector is switched
off and fully disconnected from its
power supply.
When changing the lens, avoid using
excessive force as this may damage
the equipment.
Take care to preserve the original lens
packaging and protective caps for future
use.
The projector will not power on without
the lens fitted.
page 20
Advertisement
Table of Contents
