Connector - NEC PH1201QL User Manual

Model No. NP-PH1201QL

Connector

Dimensions of the connector of the power cable are shown below.
13
±
0,2
+ 0,5
2,5
+ 0,5
6,0
-0 R3.5 min
-0
+0,5
7
-0
Unit: mm
Installation and Quick-Start Guide
+0 +0
28 20
-0,9 -0,7
POWER SUPPLY
Notes
Carefully read the contents
described in this section before
connection and connect the
cables according to the proper
procedure. Inappropriate handling
may cause fatal, serious or other
bodily injuries due to fire or
electric shock.
Before connecting the power
cables, check that the main power
switch of the projector is turned
off. Implement the connection
with AC power shut off.
Be sure to ground the equipment
to ensure safety. Use a power
cable that meets the standards
and power supply voltage of the
country where you are using the
projector and always connect the
equipment to the ground. If the
ground is not connected, it may
cause electrical shocks.
When connecting the power
cable plugs to the AC IN and the
electrical outlet, securely insert
the plugs all the way in. If the
connection between the power
cable plug and the electrical
outlet is loose, the plug area may
generate heat, causing burns and
accidents.
Users in North America:
Use a power cable no longer
than 4.5 m / 14.76 ft according to
National Electrical Code.
page 6