Model No. NP-PH1201QL
Removing the lens
1.
Loosen the two captive screws
2.
Remove the cover.
Installation and Quick-Start Guide
on the lens remote lock cover, then release the lock
1
1
1
2
LENS ASSEMBLY AND FITTING
using the provided key.
2
Notes
Before changing the lens, always
make sure the projector is switched
off and fully disconnected from its
power supply.
When changing the lens, avoid using
excessive force as this may damage
the equipment.
Take care to preserve the original lens
packaging and protective caps for future
use.
The projector will not power on without
the lens fitted.
page 19