Storing Changes For Lens Shift, Zoom, And Focus [Lens Memory] - NEC PA1705UL-W Installation Manual

3-9. Storing Changes for Lens Shift, Zoom, and Focus [LENS MEMORY]

This function serves to store the adjusted values when using the [LENS SHIFT], [ZOOM], and [FO-
CUS] functions of the projector. Adjusted values can be applied to the signal you selected. This will
eliminate the need to adjust lens shift, focus, and zoom at the time of source selection. There are
two ways to save adjusted values for lens shift, zoom, and focus.
Function name
REF. LENS MEMORY
LENS MEMORY
NOTE:
• Be sure to carry out [LENS CALIBRATION] after replacing the lens.
Adjusted values common to all input signals. At the time of installation, two kinds of
adjusted values can be stored.
If no adjusted values have been saved to [LENS MEMORY], the lens will apply [REF.
LENS MEMORY] adjusted values.
Adjusted values for each input signal.
Use the adjusted values for the signal with a different aspect ratio or resolution. The
adjusted values can be applied at the time of source selection.
Description
54
3. Convenient Features
Page
130
108