Table of Contents
Advertisement
Model No. NP-PH1201QL
Appendix C: Menu Map
Menu
Sub Menus
TITLE SELECT
Title Memory Name
Test Pattern
CONFIGURATION
Light Setup
Adjust
Lens Control
Lens Position
Focus Zoom
Reset
(Factory Default)
settings.
Filter Usage
Filter Cleaning
(Fan Usage)
(Light Usage)
(Phosphor)
(Diffuser)
(LCS)
(Douser Count)
(Setup)
(Installation)
(Memory)
(TITLE SETUP)
Reference Guide
APPENDIX C: MENU MAP
Description
Selects the title of the signal to be projected.
Selects a test pattern to be projected.
Adjusts the light source brightness (output).
Adjusts the position of the projected image.
Adjusts the size and focus of the projected image.
Returns the settings to their default values.
Selects between preset buttons and titles only, LAN settings and all
Initializes the usage time of the air filter.
Initializes the filter cleaning time.
Initializes the usage time of the fan.
Initializes the usage time of the light source.
Initializes the usage time of the phosphor.
Initializes the usage time of the diffuser.
Initializes the usage time of the liquid cooling system.
Resets the number of times the douser has been used.
This menu is inaccessible from the control panel.
Notes
Some of the information in this menu
map is summarised. See the actual
menu on the projector for full details.
Menus and menu items displayed
in parentheses cannot be accessed
from the control panel.
To access such items, you need to
connect the projector to a computer
running a specially designed
application. The software will require
special login credentials.
page 68
Advertisement
Table of Contents
