Adjusting The Vertical Position Of A Projected Image (Lens Shift) - NEC PE523X User Manual

Adjusting the vertical position of a projected image (Lens shift)

CAUTION:
Perform the adjustment from behind or from the side of the projector. Adjusting from the front could expose your
eyes to strong light which could injure them.
1. Turn the lens shift dials clockwise or counterclockwise.
Vertical dial
Turn this clockwise or counterclockwise to adjust the projection position in the vertical direction.
Horizontal dial
Turn this clockwise or counterclockwise to adjust the projection position in the horizontal direction.
Lens shift dial
Rightward
NOTE:
• The dials can be turned more than one full turn, but the projection position cannot be moved more than the range indicated on the
following page. Do not force to turn the dials. Doing so may damage the dials.
• If the lens is shifted to the maximum in the diagonal direction, the edges of the screen will be dark or shaded.
• The vertical shift adjustment must be finished with an image shifted upward. If you finish the vertical shift adjustment with an image
shifted down, the zoom/focus adjustments or strong shaking may cause a projected image to slightly shift down.
(Horizontal)
Leftward
2. Projecting an Image (Basic Operation)
Lens shift dial
(Vertical)
Downward
16
Upward