Model No. NP-PH1201QL
IP Address
Displays the IP address set up in the projector.
Setup Date
Displays the date when the projector was set up (the starting date of the warranty period).
Option Status
Displays the link status of the device mounted in slot A (media block, signal input board) on
the projector. The device name is displayed in ( ) when the projector is in standby or when
connection to the device cannot be confirmed.
B
Not Available: Slot B is not available in this projector.
A
Displays the link status of the device in slot A.
•
NC-80DS: Signal input board (NC-DS03)
•
No Board: No device mounted
Operating Guide
USING THE PROJECTOR
IP Address
System
<
( 192.168.10.10)
Information
Setup Date
2015/03/03
<
Information
Option Status
B: Not Avail...
A: NC-80DS
<
Notes
*
>
The projector has a default IP
address. Access the
page to connect the IP address of
the projector to your network. You
can later change the IP address
using
a special software application.
>
>
IP Address
page 51