Model No. NP-PH1201QL
Selecting a title or test pattern
The projector arrives with titles and test
patterns already configured. If you need
to change the configuration, contact your
dealer.
Selecting a title
Connect the title you wish to display and
switch on the input source, then switch
on the projector. If necessary, unlock the
keypad.
If the title is assigned a shortcut, press the
shortcut button and the projector will begin
displaying the title.
If there is no shortcut assigned to the title:
1.
Press the
button.
MENU
2.
Press the
LEFT
or
RIGHT
button to
cycle through the list of menus until
appears on the LCD screen. The
Select
list of menus is as follows:
•
Title Select
•
Configuration
•
(Title Setup)
•
Information
•
...
3.
When
is displayed, press
Title Select
.
DOWN
4.
Press
LEFT
or
RIGHT
to go through the
list of available titles until you reach the
title you wish to display.
5.
Press
to confirm your choice.
ENTER
The projector begins displaying the title.
An asterisk mark (*) appears on the LCD
screen to indicate the current selection.
Installation and Quick-Start Guide
Title
OPERATING THE PROJECTOR
Title Select
Title Select
Title Name
Title Select
Title Name
Notes
For detailed information about
switching on the projector and
unlocking the keypad, see
Switching the projector on
in this guide.
Menus and menu items displayed in
parentheses can only be accessed
by service personnel.
(*)
earlier
page 29