Compaq ProLiant 6000 Maintenance And Service Manual page 94

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
Your System Configuration Utility setting should resemble the following when you enable
ASR to restart into the operating system:
ASR-2 Security
The standard Compaq password features function differently during ASR-2 than during a
typical system startup.
During ASR-2, the system does not prompt for the Power-On Password. This allows the
ASR-2 to restart the operating system or Compaq Utilities without user intervention.
To maintain system security, set the server to boot in Network Server Mode (an option in
the System Configuration Utility). This option ensures that the server keyboard is locked
until you enter the Keyboard Password.
Select an Administrator Password (an option in the System Configuration Utility). During
attended ASR-2 (local or remote), you must enter this Administrator Password before any
modifications can be made to the server configuration.
Serial interface
Dial-in status
Dial-out status
Dial-out string
Network status
Network protocol
Network controller
Network host name
Network card slot
Network frame type
Network IP address
Network IP net mask
Network IP router
address
COM1
Disabled
Disabled
555-1234
Disabled
IPX
Compaq
CPQHOU
Slot #
ETHERNET_II
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
Compaq ProLiant 6000 Servers Maintenance and Service Guide
3-77