. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . .
3-10 Diagnostic Tools
703-CMOS
reports a
coprocessor
that has not
been detected
1151-Com Port
1 Address
Assignment
Conflict
1152-Com Port
2, 3, or 4
Address
Assignment
Conflict
2S
Coprocessor or
configuration error.
2S
Both external and
internal serial ports are
assigned to COM1.
2S
Both external and
internal serial ports are
assigned to COM2,
COM3 or COM4.
1. Run the System
Configuration Utility
and correct.
2. Replace the
coprocessor.
Run the System
Configuration Utility and
correct.
Run the System
Configuration Utility and
correct.
Continued