Compaq ProLiant 6000 Maintenance And Service Manual page 35

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . .
3-18 Diagnostic Tools
1778-Drive
Array resuming
Automatic Data
Recovery
process
1779-Drive
Array Controller
detects
replacement
drives
1780-Disk 0
Failure
None This message appears
whenever a controller
reset or power cycle
occurs while Automatic
Data Recovery is in
progress.
None Intermittent drive failure
and/or possible loss of
data.
None Hard drive/format error.
No action necessary.
If this message appears
and drive X has not been
replaced, this indicates an
intermittent drive failure.
This message also
appears once immediately
following drive
replacement whenever
data must be restored
from backup.
Run Diagnostics.
Replace failed assembly
as indicated.
Continued