Compaq ProLiant 6000 Maintenance And Service Manual page 32

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
POST Error Messages
1765-Slot x Drive Array Option ROM Appears to Conflict
With an ISA Card. ISA cards with 16-bit memory cannot be
configured in memory range C0000 to DFFFF along with the
SMART-2/E 8-bit Option ROM due to EISA bus limitations.
Please remove or reconfigure your ISA card.
1766-Slot x Drive Array requires System ROM Upgrade. Run
Systems ROMPaq Utility.
1767-Slot x Drive Array Option ROM is Not Programmed
Correctly or may Conflict with the Memory Address Range of
an ISA Card. Check the Memory Address Configuration of
installed ISA Card(s) or run Options ROMPaq Utility to
attempt SMART-2/E Option ROM Reprogramming.
1768-Slot x
Drive Array -
Resuming
logical drive
expansion
process.
Continued
Audible
Error Code Beeps
L=Long
S=Short
None
Probable Source of
Problem
SMART-2 Controller
error
Compaq ProLiant 6000 Servers Maintenance and Service Guide
Action
Remove or reconfigure
conflicting ISA cards.
Disable "shared memory"
on any ISA network cards
that may be installed.
Run the latest Systems
ROMPaq Utility to
upgrade your System
ROMs.
Remove or reconfigure
conflicting ISA cards,
especially any cards that
are not recognized by the
System Configuration
Utility. Try reprogramming
the SMART-2/E
Controller's ROMs using
the latest Options
ROMPaq (version 2.29 or
higher).
No action required.
Appears whenever a
controller reset or power
cycle occurs while array
expansion is in progress.
3-15