Assembling The Double-Bin Cut-Sheet Feeder - Epson FX-880 User Manual

7. Adjust the right paper guide so that it matches your paper's
width and lock it in place. Make sure the position of the guide
allows the paper to move up and down freely.
If you are loading envelopes, push back the envelope levers as
shown below.
8. Push back the paper set levers to clamp the paper or envelopes
against the guide rollers.
The cut-sheet feeder automatically loads paper when the
printer receives data.
If the first line on your page appears too high or low, you can
fix this by adjusting the top-of-form position using the micro
adjust feature. See "Adjusting the Top-of-Form Position" on
page 3-30.

Assembling the double-bin cut-sheet feeder

Using the double-bin cut-sheet feeder allows you to load two
different types of paper automatically. Before you install the
double-bin cut-sheet feeder, you need to connect the single-bin
cut-sheet feeder (C80637 ) to the high-capacity cut-sheet
feeder (C80638 ).
4-14
Printing on Single Sheets