Epson FX-880 User Manual page 102

1. Make sure the printer is turned off. Then remove the paper
guide by moving it to the upright position and pulling it
straight up. Lift the printer cover by its back edge and then
pull it straight up and off the printer.
2. Holding the cut-sheet feeder in both hands, press down on
the latch levers and fit the notches over the printer's mounting
posts, as shown below. Release the latch levers to lock the
feeder in place. If you are installing the high-capacity or
double-bin cut-sheet feeder, see the illustration on the next
page.
single-bin cut-sheet feeder
4-6
Printing on Single Sheets