Epson FX-880 User Manual page 127

IBM character table
This setting is available only in IBM 2380 Plus emulation mode.
When you select table 1, hex codes 80H to 9FH of the character
tables are used for the control codes. When you select table 2,
hex codes 80H to 9FH are used for characters. See Appendix B
for character samples.
Default-setting mode 2
Setting
Page length for front tractor
Page length for rear tractor
Charactor table
International character set for
Italic table*
* The options available for this setting vary depending on the country.
Page length for front tractor
For paper fed through the tractor in the front push position,
you can set the page length to one of the following: 3, 3.5, 4, 5.5,
6, 7, 8, 8.5, 11, 70/6, 12, 14, or 17 inches.
Page length for rear tractor
For paper fed through the tractor in the rear push position, you
can set the page length to one of the following: 3, 3.5, 4, 5.5, 6, 7,
8, 8.5, 11, 70/6, 12, 14, or 17 inches.
Changing Printer Settings From the Printer's Control Panel
Options
length in inches: 3, 3.5, 4, 5.5, 6, 7, 8, 8.5,
11, 70/6, 12, 14, 17, Others
length in inches: 3, 3.5, 4, 5.5, 6, 7, 8, 8.5,
11, 70/6, 12, 14, 17, Others
Standard model: Italic, PC 437, PC 850,
PC 860, PC 863, PC 865, PC 861, BRASCII,
Abicomp, Roman 8, ISO Latin 1
All other models: Italic, PC 437, PC 850,
PC 437 Greek, PC 853, PC855, PC 852,
PC 857, PC 866, PC 869, MAZOWIA,
code MJK, ISO 8859-7, ISO Latin1T,
Bulgaria, PC 774, Estonia, PC 866 LAT.,
ISO 8859-2
Italic U.S.A., Italic France, Italic
Germany, Italic U.K., Italic Denmark 1,
Italic Sweden, Italic Italy, Italic Spain 1
5
5-7