Assembling The Double-Bin Cut-Sheet Feeder - Epson FX-1180 User Manual

Assembling the double-bin cut-sheet feeder

Using the double-bin cut-sheet feeder allows you to load two types of
single-sheet paper in the printer at the same time and easily switch
between them. Before you install the double-bin cut-sheet feeder, you
need to connect the single-bin cut-sheet feeder (C80637
high-capacity cut-sheet feeder (C80638
1. Remove the gear cover from the back of the high-capacity cut-sheet
feeder by pressing down the tab and pulling the cover backward.
Store it in a safe place.
2. Hold the single-bin cut-sheet feeder in both hands. Fit the notches in the
single-bin cut-sheet feeder over the mounting posts on the back of the
high-capacity cut-sheet feeder.
]
/C80640
Enhancing Your Printer With Options
] ]
/ C80639 ) to the
]
).
A
A-13