Epson FX-880 User Manual page 85

4. Press the LF/FF
on the page, or press the Load/Eject
top-of-form position down on the page.
Note:
The printer has a minimum and a maximum top-of-form
position. If you try to adjust it beyond these limits, the
printer beeps and stops moving the paper.
When the paper reaches the default top-of-form position,
the printer also beeps and stops moving the paper briefly. You
can use the default setting as a reference point when
adjusting the top-of-form position.
5. After you set the top-of-form position, press the Pause button
to exit micro adjust mode.
,
button to move the top-of-form position up
Printing on Continuous Paper
7
button to move the
3
3-31