Epson FX-880 User Manual page 156

The wrong character table is
selected in your software.
The printer you want to use is
not selected in your software
Your application software is
not correctly configured for
your printer.
Software settings override
settings you make using the
default-setting mode, EPSON
Remote!, or with the control
panel buttons.
Vertical printed lines are not aligned.
Cause
Bidirectional printing, which
is the printer's standard
printing mode, may be out of
alignment.
8-12
Troubleshooting
Select the correct character table using
your software, the default-setting
mode, or the EPSON Remote! utility.
The character table setting in your
software overrides settings made in the
default-setting mode or EPSON
Remote!.
Choose the correct printer from the
Windows desktop or in your
application before printing.
Make sure that your application
software is correctly configured for
your printer. See your application
documentation. If necessary, install or
reinstall the printer driver software as
described in Chapter 2.
Use your application software to select
the font.
What to do
Use the printer's bidirectional
adjustment mode to correct this
problem. See "Aligning Vertical Lines
in Your Printout" later in this chapter.