Epson FX-880 User Manual page 70

8. Attach the paper guide and lay it flat on the printer. Open the
edge guides all the way to the left and right, then raise the
continuous paper support.
9. Turn on the printer. When the printer receives data, it
automatically loads the paper and starts printing.
10. After you finish printing, press the Tear Off/Bin button to
advance the paper to the printer's tear-off edge, and tear off
your printout.
If your paper's perforation is not aligned with the tear-off edge,
you can use the micro adjust feature to move the perforation
to the correct tear-off position as described in "Adjusting the
tear-off position" on page 3-28.
If the first line on your page appears too high or low, you
can fix this using the micro adjust feature as described in
"Adjusting the Top-of-Form Position" on page 3-30.
c
Caution:
Never use the knob to adjust the top-of-form position; this may
damage the printer or cause it to lose the top-of-form position.
3-16
Printing on Continuous Paper