Epson FX-880 User Manual page 129

3. To change settings in default-setting mode 1, hold down the
Tear Off/Bin button while you press the Operate button to
turn on the printer. To change settings in default-setting mode
2, hold down the Tear Off/Bin and LF/FF buttons while you
press the Operate button to turn on the printer.
The printer enters the default-setting mode you selected and
prints the language selection instructions (one page).
4. Press the Load/Eject button until the Paper Out and Pause
lights indicate the language you want, as described in the
language selection instructions.
5. Press the Tear Off/Bin button to print the default-setting
mode instructions (two pages) in the language you selected.
The printed instructions list the settings you can change,
describe how to change them, and show you how the control
panel lights help you make settings. Use these instructions to
change the printer's default settings from the control panel.
Note:
The arrows in the instructions indicate the printer's current settings.
6. When you finish making settings, press the Operate button to
turn off the printer and exit the default-setting mode.
Note:
You may exit either default-setting mode any time by turning off the
printer while the printer is paused. Any settings you have made remain
in effect until you change them again.
Changing Printer Settings From the Printer's Control Panel
5
5-9