Table of Contents
Advertisement
50
Glass Frame Removal and Installation
A barrier designed to reduce the risk of burns from the hot viewing glass is provided with this
appliance and shall be installed for the protection of children and other at-risk individuals.
If the barrier becomes damaged, the barrier shall be replaced with the manufacturer's barrier for
this appliance.
The appliance must be completely cool before removing the glass.
Do not strike or slam the glass.
Warning: Do not operate appliance with the glass front removed, cracked or broken.
Replacement of the glass should be done by a licensed or qualified service person.
1. Remove the screen-trim assembly by lifting the assembly up slightly and tilting it toward you. The mounting hooks
on the back of the assembly will disengage the fireplace. Set the assembly aside for reinstallation.
NOTE: Opening the access door on the front of the assembly allows for a easy location to get a secure grip on the
assembly for removal
Top hook engages
this slot in bracket
© Travis Industries
Installation
(for qualified installers only)
Top Corner
42 ProBuilder
54 ProBuilder
Bottom Corner
Replacement Barrier Part #
250-04494
270-01993
6/3/19 - 1453
Bottom hook
engages this slot in
bracket
PB 42 & 54 MV/GSB2 Install
Advertisement
Table of Contents
