User's Manual
AMG-2100
Gigabit Access and AP Management Gateway/
AMG-2101
Gigabit Access and AP Management Gateway Plus
14.6 NT Transparent Login
Configure NT Transparent Login, go to:
Users >> Authentication >> NT Domain-Server1~4 >> Configure.
This function refers to Windows NT Domain single sign-on. In Windows NT or AD environment, users
must need to login to Domain first, and then they will be assigned the access right in this domain.
On the other hand, user also need to login to AMG-2100/AMG-2101 to get the network access right. So
user must login twice for network access right and domain resource access right.
So, this function is use to combine these by a single user login. Users only need to login once, and then
they will be assigned the access right in this domain and network access right from
AMG-2100/AMG-2101.
When Transparent Login is enabled, clients will log into the system automatically after they have logged
into the NT domain.
Enable Local VPN: Check the checkbox to enable local VPN under transparent login mode. When
enabled, local VPN connection will be automatically created under transparent login mode. For the local
VPN to work under transparent login mode, however, it requires support from Windows Server – need
to install additional logon script on Windows Server.
190