Configure Ap Template - LevelOne AMG-2100 User Manual

5.2 Configure AP Template

Configure AP Template, go to: Access Points >> Templates.
Template is a model that can be copied to every AP and not necessary to configure the AP individually.
There are three templates provided for each type of AP. Select an AP Type, and click Edit to go on
configuration.
Another easy way to configure the template, it is copy the configuration from an existing AP to the
template. Select a Source AP, and without configuring the template from the beginning,
administrators can also revise some settings for demand.
If copy is not desired, please select NONE. Input the Name and Remark, if you want to change these
to memorize easily. If not, then click the button of Configure to go on configuration.
Template Editing: Here is the section that administrators can configure template name,
template source, and template remark.
Name: The name shown for this particular template will change according to what given
by administrators.
Copy Settings From: Select an existing AP and click Apply to save its settings as the
template settings.
Remark: The remark of this template profile.
Template Configuration
The administrator can set the template configuration manually. Click Configure button to have
detailed configurations.
AMG-2100 Gigabit Access and AP Management Gateway/
AMG-2101 Gigabit Access and AP Management Gateway Plus
70
User's Manual