Table of Contents
Advertisement
3.5.2 Configure Service Zone network
Configure Service Zone, go to: System >> Service Zones.
Service Zone Status: Each service zone can be enabled or disabled except for the default
service zone.
Service Zone Name: The name of service zone could be input here.
Network Interface:
VLAN Tag (Tag-Base only): The VLAN tag of this service zone.
o
Operation Mode: Contains NAT mode and Router mode. When NAT mode is chosen,
o
the service zone runs in NAT mode. When Router mode is chosen this service zone runs
in Router mode.
IP Address: The IP Address of this service zone.
o
Subnet Mask: The subnet Mask of this service zone.
o
AMG-2100
Gigabit Access and AP Management Gateway/
AMG-2101
Gigabit Access and AP Management Gateway Plus
33
User's Manual
Advertisement
Table of Contents
