The WHG-1000 is the most economical yet feature-rich Wireless Hotspot Gateway, targeting mini-size stores who want to provide small, single-point wireless Internet access service. WHG-1000 is a perfect choice for beginners to run hotspot businesses. It does not cost a fortune to buy a pile of equipment, nor does it take the skills of an expert to glue multiple applications out of multiple freeware.
2. Reset : Press the Reset button once to restart the system, The LED except Power indicator will be off before restarting. 3. LAN(POE) : Clients devices connect to WHG-1000 via LAN ports 4. WAN1/WAN2 : Two WAN ports are available on the system.
Page 5
WHG-1000 Quick Installation Guide Rear Panel WHG-1000 supports 1 RF interface with 2 SMA connectors for Antenna connection. LED Panel : LED ON indicates power on, OFF indicates power off. 2. WAN1/WAN2/LAN : LED ON indicates connection, OFF indicates disconnection, FLASH indicates packets transmitting.
3. Connect WHG-1000 to your network device. Connect one end of the Ethernet cable to LAN port of WHG-1000 on the front panel. Connect the other end of cable to a PC for configuring the system. The LAN LED indicator should be ON to indicate a proper connection.
Connect the PC to the LAN(PoE) port of WHG-1000. An IP address will be assigned to the PC automatically via the WHG-1000. 2. Launch a web browser to access the web GUI of WHG-1000 by entering “http://192.168.2.254” in the address field.
Page 8
300Mbps Wireless PoE Hotspot Gateway WHG-1000 Quick Installation Guide 4. After a successful login, the “Home Page” will appear on the screen.
WHG-1000 provides wireless and wired network service with authentication required for clients in Service Domain. Clients in the each Service Domain are isolated with each other. WHG-1000 supports 8 Service Domains, Domain-0 to Domain-7. Administrator can select authentication type on each Service Domain. If Authentication Required is enabled, the clients are required to get authenticated successfully before access the Internet.
Page 10
300Mbps Wireless PoE Hotspot Gateway WHG-1000 Quick Installation Guide Step 3 : Select Connection Type for WAN1 Port and Set DNS Server Click System -> WAN, the WAN Setup page will appear. Select the appropriate Connection Type for WAN1 port, there are four types of WAN1 connections to be selected from: Static IP, Dynamic IP, PPPoE Client and PPTP Client.
Page 11
300Mbps Wireless PoE Hotspot Gateway WHG-1000 Quick Installation Guide Move AP0 Icon to Domain 1 window and click, the VAP0 Setup page will appear. Select desired wireless ESSID and related settings. Click Tool Icon on Domain 0 window, the Service Domain0 Setup page will appear. For each Service...
Page 12
300Mbps Wireless PoE Hotspot Gateway WHG-1000 Quick Installation Guide Select Local Radius for Domain0's Authentication Type. Enter the Redirect URL that users should be initially directed to when successfully authenticated to the network. Configure related settings for the selected Auth Type.
Page 13
300Mbps Wireless PoE Hotspot Gateway WHG-1000 Quick Installation Guide Step 6 : Add Local Radius Accounts Click Service Domain -> Authentication -> Local Radius Accounts, the Local Radius Accounts Management page will appear. A new account can be added into the Local Radius Database. To add a account here, enter the Username(e.g.
1000 (e.g. AP00) and get associated with this ESSID. 2. The client device will obtain an IP address automatically via DHCP from WHG-1000. Open a web browser on a client device, access any URL, and then the Domain1 User Login Page will appear.
Page 15
Configuration (e.g. “test1” as the Username and “11111” as the Password); then Click Login button. Congratulation ! The Timer page will appear after a client has successfully logged into WHG-1000 and has been authenticated by the system. Now, you are connected the network and Internet!